ChiAha
  • ReliaSim Overview
    • Getting Started
    • Navigation
    • Structure
      • Node Types
        • Buffers
        • Constraints
          • Limits
          • Interrupts
            • Interrupt Types
            • Time to Failure
            • Time to Repair
            • Distributions
              • Fixed Distribution
              • Uniform Distribution
              • Normal Distribution
              • Weibull Distribution
              • LogNormal Distribution
              • Johnson SU Distribution
        • Splits
        • Merges
        • Conveyors
        • Conversions
    • Experiments
      • Experiment Types
      • Experiment Parameters
    • Reports
      • OEE
      • Single Run Results
      • Multi-Run Results
      • Buffer Trade-off Results
      • Interrupt Loss/Gain Results
  • ChiAha Discrete Rate Simulation
    • Example
    • References
  • Building your first model
    • Structure
    • Node View
    • Conversions
    • Interrupts
    • Experiments and Reporting
    • Saving your model
  • Another Example Model
    • Basic Structure
    • Conversions
    • Splits and Merges
    • Full Structure
    • Node View
      • Units and Conversions
      • Rates and Buffers
    • Interrupts
    • Experiments
      • Single Run
      • Interrupt Loss/Gain
      • Buffer Tradeoff
    • Summary
  • Wishbone Overview
    • Video Overview
    • Loading a File
    • Excluding Cause Groups
    • Mapping Cause Groups
    • Reviewing Estimates
  • Model Building with Markdown
    • The Click-Connect System
Powered by GitBook
On this page

Was this helpful?

  1. ReliaSim Overview
  2. Structure
  3. Node Types
  4. Constraints
  5. Interrupts
  6. Distributions

Fixed Distribution

The Fixed distribution is used to model an unchanging, constant value. This can be useful for modeling events that are set in stone. Often, these will be events scheduled based on the wall clock. For example, it would be common for a shift change to occur every 8 hours.

  • Parameter 1 is the value.

  • Parameters 2-4 are not used.

PreviousDistributionsNextUniform Distribution

Last updated 7 months ago

Was this helpful?