ChiAha
  • ReliaSim Overview
    • Getting Started
    • Navigation
    • Structure
      • Node Types
        • Buffers
        • Constraints
          • Limits
          • Interrupts
            • Interrupt Types
            • Time to Failure
            • Time to Repair
            • Distributions
              • Fixed Distribution
              • Uniform Distribution
              • Normal Distribution
              • Weibull Distribution
              • LogNormal Distribution
              • Johnson SU Distribution
        • Splits
        • Merges
        • Conveyors
        • Conversions
    • Experiments
      • Experiment Types
      • Experiment Parameters
    • Reports
      • OEE
      • Single Run Results
      • Multi-Run Results
      • Buffer Trade-off Results
      • Interrupt Loss/Gain Results
  • ChiAha Discrete Rate Simulation
    • Example
    • References
  • Building your first model
    • Structure
    • Node View
    • Conversions
    • Interrupts
    • Experiments and Reporting
    • Saving your model
  • Another Example Model
    • Basic Structure
    • Conversions
    • Splits and Merges
    • Full Structure
    • Node View
      • Units and Conversions
      • Rates and Buffers
    • Interrupts
    • Experiments
      • Single Run
      • Interrupt Loss/Gain
      • Buffer Tradeoff
    • Summary
  • Wishbone Overview
    • Video Overview
    • Loading a File
    • Excluding Cause Groups
    • Mapping Cause Groups
    • Reviewing Estimates
  • Model Building with Markdown
    • The Click-Connect System
Powered by GitBook
On this page

Was this helpful?

  1. ReliaSim Overview
  2. Structure
  3. Node Types

Conversions

On this screen, the user will change the units at this point in the model structure.

PreviousConveyorsNextExperiments

Last updated 10 months ago

Was this helpful?

Many processes do not handle the same material all the way through. As material flows through a process, it gets transformed into different materials, grouped into a larger collection, or split off into smaller sub-materials. To model this accurately, the Conversion node is used.

The Conversion node is used to change the units in the model.

For example, the material flowing through the upstream constraint handles bottles, while the downstream constraint handles cases. Between the two constraints, the user will need a conversion block to define the number of bottles per case.

Conversion Icon