ChiAha
  • ReliaSim Overview
    • Getting Started
    • Navigation
    • Structure
      • Node Types
        • Buffers
        • Constraints
          • Limits
          • Interrupts
            • Interrupt Types
            • Time to Failure
            • Time to Repair
            • Distributions
              • Fixed Distribution
              • Uniform Distribution
              • Normal Distribution
              • Weibull Distribution
              • LogNormal Distribution
              • Johnson SU Distribution
        • Splits
        • Merges
        • Conveyors
        • Conversions
    • Experiments
      • Experiment Types
      • Experiment Parameters
    • Reports
      • OEE
      • Single Run Results
      • Multi-Run Results
      • Buffer Trade-off Results
      • Interrupt Loss/Gain Results
  • ChiAha Discrete Rate Simulation
    • Example
    • References
  • Building your first model
    • Structure
    • Node View
    • Conversions
    • Interrupts
    • Experiments and Reporting
    • Saving your model
  • Another Example Model
    • Basic Structure
    • Conversions
    • Splits and Merges
    • Full Structure
    • Node View
      • Units and Conversions
      • Rates and Buffers
    • Interrupts
    • Experiments
      • Single Run
      • Interrupt Loss/Gain
      • Buffer Tradeoff
    • Summary
  • Wishbone Overview
    • Video Overview
    • Loading a File
    • Excluding Cause Groups
    • Mapping Cause Groups
    • Reviewing Estimates
  • Model Building with Markdown
    • The Click-Connect System
Powered by GitBook
On this page

Was this helpful?

  1. ReliaSim Overview
  2. Experiments

Experiment Parameters

The following parameters are needed to setup an experiment:

Parameter
Notes
Applicable to:

Name

Experiment Name

All Experiments

Seed number

The starting seed number used in association with the constraint distributions

All Experiments

Start Date

By default this is the date the model was created

All Experiments

Duration

A number specifying the length of the model run

All Experiments

Time Unit

Duration time unit (default is days)

All Experiments

Sink Buffers

A list of all the ending buffers in the model

All Experiments

Theoretical Limit

Maximum limit value for all constraints

All Experiments

Experiment Type

Single Run

Multi-Run

Interrupt Loss/Gain

Buffer Interrupt Tradeoff

All Experiments

Replications

Number of runs to execute

All Experiments except Single Run

Buffer

Buffer name to vary

Buffer Tradeoff experiment only

Min Capacity

Minimum Buffer size to consider

Buffer Tradeoff experiment only

Step Size

Increments of Buffer size

Buffer Tradeoff experiment only

Max Capacity

Maximum Buffer size to consider

Buffer Tradeoff experiment only

PreviousExperiment TypesNextReports

Last updated 10 months ago

Was this helpful?